The LiteMat Plus 8 is one of the most affordable, professional cinema lighting fixture available today. The largest LiteMat in the line makes a great self-lit 4×4, all from a single light stand. The LiteMat+ Plus 8 is based on eight “tiled” light engines. The head unit features 1152 new CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener. Its lightweight (10.4 lb) and thin profile (0.9 in.) make this fixture ideal for any lighting challenge you encounter.
For LiteMat+ Plus ONE, TWO and TWO-LONG, we recommend single-battery DC power solutions. Optionally, double-battery options shown below may also be used. These “double” solutions always require the use of 2 batteries, however. For LiteMat+ THREE and FOUR, we only recommend the double-battery solutions with 2 or more battery packs for reliable operation. Think one battery pack for every 100 watts of power.
A multi-wall polypropylene (coroplast) skirt that helps control the light output by limiting the amount of light exiting the fixture beyond the 120-degree primary field. The PolySkirt is assembled using shock-cord and mounts to the LiteMat head with Velcro. The PolySkirt also serves as an accessory holder as all remaining accessories require its use.
Woven fabric “diffusers “are a typically used item for this type of lighting system. LiteMat Diffusers are made in industry- standard varieties and are assembled by stitching “hook” Velcro around their borders that mate with the loop on the skirt. Presently, there are 3 densities grid-cloth (full, half, and quarter). This item is a single diffuser in quarter density.
Our 12 ft PL7 extension cable features a locking connection and is compatible with every size of the LiteMat+ Plus, the LiteTile+ Plus family, and the new LiteDimmer+ Plus series.
An aluminized plastic molded sheet with parabolic elements within each square cell that provides desirable light output with refined edges and an even field. Velcro One-Wrap die cut strips are attached to the edges to serve as a mounting method to the required PolySkirt.
The LiteMount is based on the RAM® ball-and-socket mounting system – a trusted, durable, and reliable mounting system with many ancillary accessories.
The KitBag holds the LiteMat fixture as well as the accessories including the PolySkirt, Parasquare® Louver, Diffusers, LiteDimmer, power supply, Centre Mount, and cables. This bag is specifically designed to protect your gear from “everyday” damage due to environmental conditions.